- Home
- ยป
- Products & Services
- »
- Induction Heater
Induction Heater
JH400 Induction Heater
Product Brochure
| Power | 4 kW |
| Heater Material | Metal |
| Color | White & Gray |
| Brand | Josam |
| Voltage | 208-240 V, 1 Ph+PE, 50/60 Hz, 16 A |
| Size | 520x360x990 mm |
| Country of Origin | Made in India |
JH400 is used for sheet metal straightening and loosening of smaller machine parts such as:
- nuts up to size M24
- pins
- clamping rings
pins
clamping rings
The JH400 is mainly used for lighter repair work. The high power induction heater can be used in the same way as a gas torch, but without destroying nearby parts. Overheating is avoided through the unique 5-step regulation and power control system. The heat is applied directly to the material being worked on without the necessity for removing heat-sensitive components nearby.
JH1500 Induction Heater
Product Brochure
| Heater Material | Metal |
| Color | Black |
| Brand | Posilock |
| Size | Standard |
| Country of Origin | Made in India |
| Type | induction heater |
| model | JH 1500 |
| Mains supply | 380-400 V, 63 A |
| Protection class | IP 21 |
| Working frequency | 14-30 kHz |
| Input power | 15 kW |
| Output power - induction power | 13 kW |
| Induction cable | 6 m |
| Cooling system | Water cooled with compressor |
| Continuous operating time | > 60 minutes* |
| Weight | 175 kg with full tank |
| Water tank | 40 liters |
| Size (LxWxH) | 973x663x1168 mm |
| temperature | 20 DegreeC |
JH1500 is designed for heavy duty work that requires plenty of heat, for example straightening of:
- Chassis
- Heavier parts
- Axles
JH1500 is the successor of the JH1300 induction heater. This upgraded version is lighter, has improved software and is easier to maneuver but still produces the same amount of power as its predecessor. Moreover, it features five output levels and is water cooled with compressor for optimal running time. To be able to execute the most demanding types of heating work, this is your weapon of choice.
Induction Heater
Product Brochure
| Power | 3.7 kW |
| Heater Material | Metal |
| Color | Black,Red & White |
| Brand | Josam |
| Voltage | 208-240 V, 1 Ph+PE, 50/60 Hz, 16 A |
| Size | 520x360x990 mm |
| Country of Origin | Made in India |
| Mains supply | 380-400 V, 32 A |
| Protection class | IP 21 |
| Working frequency | 14-30 kHz |
| Output stages | 5 |
| Input power | 11 kW |
| Output power - induction power | 10 kW |
| Induction cable | 6 m |
| Cooling system | Water cooled |
| Continuous operating time | 40 minutes* |
| Weight | 105 kg with full tank |
| Water tank | 35 liters |
| Size (LxWxH) | 757x557x1166 mm |
| temperature | 20 DegreeC |
- High efficiency with a controlled heating output.
- Phase monitors, cooling water regulators, as well as built-in safety fuses.
- A new and effective inductor which is easy to service.
The JH400 is mainly used for lighter repair work. The high power induction heater can be used in the same way as a gas torch, but without destroying nearby parts. Overheating is avoided through the unique 5-step regulation and power control system. The heat is applied directly to the material being worked on without the necessity for removing heat-sensitive components located in the vicinity.
Technical information :
| Mains supply: | 208-240 V, 1 Ph+PE, 50/60 Hz, 16 A |
| Degree of protection: | IP 21 |
| Working frequency: | 18-40 kHz |
| Out effect - induction power: | 3,8 kW |
| Heating power: | 1,6 kW |
| Induction cable: | 3 m |
| Cooling system: | Water cooled (distilled) |
| Weight: | 54 kg with full tank |
| Water tank: | 20 litres |
| Size (LxWxH): | 520x360x990 mm |
Induction Heater
| Power | 3kW |
| Brand | Simatec |
| Voltage | 230 V / 50 - 60 Hz / 3,7 kVA |
| Size | 35 kg |
Induction Heater
| Power | 3kW |
| Brand | Simatec |
| Voltage | 230V/50Hz |
| Size | 17kg |