- Home
- ยป
- Products & Services
- »
- Laser Geometrical Measurement Tool
Laser Geometrical Measurement Tool
Parallelity of rolls, deisel engine line bore measurement and ship sighting are other applications which can be covered with special system made for these critical application.
Laser Bore Alignment E950
Product Brochure
Usage/Application | Bore Sighting Alignment |
Types of Laser | EasyLaser |
Detector | 20 mm |
Display | VGA 5.7" colour screen, backlit LED |
Type Of Alignment | Bore Alignment |
Inspection Service For | Ship propeller shaft bores, diesel engine bore alignment |
Memory | 100000 measurements can be saved |
Accuracy Mm | 0.001 mm |
Brand | Easylaser |
Working Range With Receiver | 40 mtrs |
Number Of Items | 65 and 67 |
Laser wavelength | 630-680 nm |
Housing material | Anodized aluminium |
Laser Safety Class | Class 2 |
Type of laser | Diode laser |
Beam diameter | 6 mm [1/4"] at aperture |
Working distance | 40-metre [130'] |
Operating temperature | 0-50 DegreeC |
Weight | 2385 g |
Easy-Laser® E950 makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to simple operation.
The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. You can then evaluate the results directly on-site with different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is the check of ovality, for example, to analyse the wear rate. The measurement system takes care of all these complicated calculations for you. You measure and align both full and half bearing journals with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability, and measure with a resolution of 0.001 mm [0.05 mils]. Measurement distance up to 40 m [130 feet]. Easy-Laser® E950 is suitable for use both in production and out in the field.
FOUR VERSIONS OF THE MEASUREMENT SYSTEME950-A or E950-C
Primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications. Positioning workpieces in machine tools is also an appropriate application.
E950-B or E950-D
Primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.
Which system to use depends on the application. Please contact your local Easy-Laser distributor for assistance.
STRAIGHTNESS OF SHAFTS AND COUPLING ALIGNMENTWith the systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train on the market. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.
Laser Turbine Alignment System E960
Product Brochure
Type Of Alignment | Laser Alignment |
Product For Alignment | Steam Turbines |
Usage/Application | Turbine diaphragm alignment |
Weight | 2385 g |
Working Range With Receiver | 40 mtrs |
Automatic Switch-Off | yes |
Ip Protection Class | 65 and 67 |
Low Battery Indication | yes |
Beam diameter | 6 mm [1/4"] at aperture |
Operating time/battery | approx. 15 hours |
Type of battery | 1 x R14 (C) |
Type of laser | Diode laser |
Operating temperature | 0-50 DegreeC |
Working distance | 40-metre [130'] |
Laser Safety Class | Class 2 |
Laser wavelength | 630-680 nm, visible red light |
Housing material | Aluminium |
The system comes in two versions. Easy-Laser® E960-A has a measuring probe with a stroke of 10 mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines. Easy-Laser® E960-B has a measuring probe with a stroke of 60 mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content further down the page.
Easy-Laser® E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the WIRELESS detector unit and measurement programs that guides you through the measurement process.
All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery. The versatile design solves the straightness measurement problems quickly and with precision for any kind of application. Objects up to 40 m (132 feet) can be measured. The detector reads measurement values with a resolution of 0.001 mm (0.05 mils).
The Turbine system comes in two versions.
Easy-Laser® E960-A suitable for gas turbines and smaller steam turbines, and Easy-Laser® E960-B for larger turbines.
- Add, remove and remeasure measurement points
- Measures both full bores and half bores
- Multi-point measurement
- Bore ovality measurement
- CALCULATEwaviness (short and long) and best-fit
Additional Information:
- Item Code: E960
Easy Laser E930 Laser Extruder Alignment
Product Brochure
Type Of Alignment | Laser Alignment |
Product For Alignment | Extrusion Machine |
Usage/Application | Bore alignment of extrusion machines |
Working Range With Receiver | 40 mtrs |
Automatic Switch-Off | Yes |
Battery Type | Heavy duty Li Ion chargeable |
Ip Protection Class | IP 65 and 67 |
Low Battery Indication | Yes |
Laser wavelength | 635-670 nm, visible red light |
Type of laser | Diode laser |
Working distance | 40-metre [130' ] |
Beam diameter | 6 mm [1/4"] at aperture |
Model | E930 |
Laser Safety Class | Class 2 |
Type of battery | 1 x R14 (C) |
Operating temperature | 0-50 DegreeC |
With the Easy-Laser® E930 system, pipes with diameters down to 50 mm can be measured, at a range of up to 40 m. The transmitter's laser beam can be compared to an absolutely straight and weightless ruler, that is to say a perfect starting point for precision measurement.
During the alignment procedure both detector and spindle are rotated, thus self calibrating the system. This way you can determine how the centre line of the spindle is, relative to the tube’s centre at the inlet end.
The detector's measurement value is transferred to the display unit wirelessly, which means that one can measure more freely. The measurement system has programs that guide you step-by-step, using clear graphics on a large 5.7" colour screen. You can also produce full documentation for your measurement job, with direct generation of PDF reports, and database programs for PC for example.
The gearbox shaft centre must coincide with the centre line of the extruder tube. Otherwise the screw at the inlet’s end will be pressed against the tube, which will lead to abnormal wear of both screw and tube along with increased energy consumption. This wear can also result in metal fragments in the produced material. It is important that the extruder tube is straight so that the screw does not rest against the tube in any part, which can result in abnormal wear and fragments of metal in produced material. We will also get a more even temperature of produced material which in the end results in a better product.
Easy-Laser® E930 is a complete system in itself, with laser transmitter, detector and display unit. You can also add other parts from our extensive range to build a system that suits your specific needs and requirements, because all the measurement programs are included as standard. For example add shaft alignment equipment for other rotating machines, and lasers for flatness measurement.
Additional Information:
- Item Code: E930
Laser Sawmill Alignment E980
Product Brochure
Type Of Alignment | Laser Alignment |
Product For Alignment | Sawmill |
Usage/Application | Sawmill alignment |
Working Range With Receiver | 40 mtrs |
Automatic Switch-Off | yes |
Battery Type | Heavy duty Li Ion chargeable |
Ip Protection Class | 65 and 67 |
Low Battery Indication | yes |
Country of Origin | Made in India |
Easy-Laser® E980 is a laser based measurement and alignment system that helps sawmills to make optimal use of their machines. By setting the machines up correctly it is possible to maintain a HIGH RATE of production with the highest quality end products hour after hour.
The Easy-Laser® E980 Sawmill system will help you increase efficiency andSAVE MONEY in your sawmill. The system measures straightness, flatness and squareness. The system is easy to use also for your own maintenance and production staff. It can be used equally well for circular saws and band saws.
Laser Sawmill Alignment E980
- Higher production speed
- Less unplanned downtime
- Better product quality
- Longer lifetime for blades
- Longer lifetime for bearings
- Less vibration and Less waste material
Geometric Alignment E920
Product Brochure
Usage/Application | Geometrical Alignment |
Types of Laser | Diode Laser |
Product For Alignment | CNC and VMC, HMC |
Detector | 20mm |
Type Of Alignment | Geometrical Axis Alignment |
Display | VGA 5.7" Colour Screen,Backlit LED |
Memory | 100 000 Measurements Can Be Saved |
Accuracy Mm | 0.001mm |
Brand | Easy Laser |
Weight | 2650 g |
Industry Type | Manufacturing |
Working Range With Receiver | 20 mtrs |
Ip Protection Class | 66 and 67 |
Model Number | E920 |
Communication | BT Wireless Technology |
Housing material | ABS |
Environmental protection | IP Class 66 and 67 |
Dimensions | 53x32x24 mm |
Measuring programs | Complete set |
Country of Origin | Made in India |
- Measurement System For All Types Of Geometric Measurement
- This system can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise.
- Displayed resolution is 0.001 mm [0.05 mils]. The laser transmitter is our well known big seller, the D22 with levelling table, strong magnetic feet, and a range of up to 40 m. The transmitter's laser beam can be compared to an absolutely straight and weightless ruler, that is to say a perfect starting point for precision measurement. The swivelling laser head gives a laser plane parallel to the measured object and can also angle the laser beam 90° to the sweep for squareness measurement.
- The display unit has a large and clear 5.7” colour screen. The programs guide you step-by-step through the measuring process, which makes it easy even for inexperienced users. The system can provide full documentation, with direct generation of PDF reports, and database programs for PC for example. The detector transfers the measurement data to the display unit wirelessly, or by cable if required. The advantages of wireless are especially clear on mechanical constructions and objects where cables can snag or get in the way.
- The most common method is to fix the laser transmitter to the measurement object using the mounting magnets, or mounting it on a tripod (accessory) to one side. A pin is also provided to secure the laser transmitter to a machine spindle or equivalent, to check straightness and spindle alignment for example.
- Easy-Laser® E920 is a complete system in itself, with laser transmitter, detector and display unit. But it is also an excellent starting point for creating a measurement system that suits your specific needs and requirements, because all the measurement programs are included as standard! Add extra laser transmitters, measuring units and brackets as well as other accessories from the wide Easy-Laser® range. Now or in the future.
Digital Precision Level E290
Product Brochure
Usage/Application | Leveling |
Brand | Easy-Laser |
Size | W X H X D 149 X 40 X 35 mm |
Model Number | E290 |
Weight | 530 g |
Application | Industrial |
Dimensions | WxHxD 149x40x35 mm |
Material | Anodized Aluminium,ABS Plastics |
Color | Black |
Model Number/Name | E290 |
Working Range | 2 mm/m |
Warranty | 3years |
Resolution | 0.001mm/m |
Data Storage | Yes In App On Mobile |
Dust Water Protection | IP Class 67 |
Operating Temperature | -10 to 50 deg C |
Is It Magnetic | Non Magnetic |
Country of Origin | Made in India |
Digital levels are extremely useful tools for setting-up and aligning most types of machine, for example, levelling machine tables, rolls, bases, etc. Other areas of use include checking straightness, flatness and parallelism.
Easy-Laser® E290 offers the possibility of documenting the work, by wirelessly connecting to your Easy-Laser® alignment system. Today, documentation is a common client requirement.
E290 is the perfect addition to laser based alignment systems and is an investment that can be recouped quickly thanks to the broad areas of use.
Accuracy is guaranteed by the precision-ground, hardened steel base. Easy-to-read OLED display and a rechargeable battery make it easy to use. Two mounting holes allow for your own adaptations and fixtures.
Roll Alignment Kit E970 and E975
Product Brochure
Type Of Alignment | Parallelism Check |
Product For Alignment | Rolls |
Brand | EasyLaser |
Detector | 20 mm |
Memory | 100000 measurements |
I deal in | New and Second Hand |
Working Range With Receiver | 40 mtrs |
Automatic Switch-Off | Yes |
Battery Type | Heavy duty Li Ion chargeable |
Ip Protection Class | 65 & 67 |
Low Battery Indication | Yes |
Housing material | Aluminium |
Operating temperature | 0-50 DegreeC |
Laser Safety Class | Class 2 |
Weight | 2650 g |
Beam diameter | 6 mm |
Relative humidity | 10-95% |
Dimensions | 139x169x139 mm |
Laser wavelength | 630-680 nm |
Type of laser | Diode laser |
Easy-Laser® E970 Parallelism system use the traditional method where a laser beam is pointed alongside the machine, and then deflected 90 degrees towards the measurement object by a penta prism.
The prism is moved along the beam, which is deflected to each roll that is to be measured, and maybe aligned. Both ends of the roll are measured, and you get an angular value which is compared to the reference line (base line) or a reference roll. Besides paper machines, printing machines and rolling mills you can also measure and align rails, overhead tracks, metal sheet cutters and many other types of machines.
The E970 is especially suitable when many objects are to be measured and aligned, and when measuring over a long distance. The maximum distance with a standard system is 80 metres, the number of measurement objects can be several hundred, but is more likely limited by other practical factors than the system software! The alignment of the rolls can be performed in live mode with instant feedback. You can add, remove and remeasure objects any time during measurement. The result is displayed both graphically and digitally in a table, and a PDF report can be produced directly on-site. Then transfer the results to your PC and the data base software EasyLink™ (included).
Easy-Laser® E970 is not only limited to parallelism measurement. You can also use the system to measure level, straightness and flatness on wire sections (suction boxes), flatness on foundations and straightness of rolls. With a few accessories you can also do shaft alignment. This makes the E970 a very cost effective solution for your maintenance department.
Geometrical Measurement E910 / E915
Product Brochure
Model Number | E910 |
Brand | EasyLaser |
Usage/Application | Flange Flatness Measurement |
Type Of Alignment | Flatness check |
Laser Type | Dot Laser |
Range | 40 mtrs |
Touch Display | Industrial display with keypad |
Product For Alignment | Flatness of any structure |
Application | Industrial |
Measuring Range | 40 Meters |
Warranty | 3 years |
Accuracy | 0.001mm |
Detector | 18 mm |
Battery | Heavy duty Li Ion chargeable |
Protection Class | IP class 65 |
Calibration Cycle | 1 year in india |
Memory | 100 000 measurements can be saved |
Data Interface | USC |
Temperature Range | -10 to 50 deg C |
Screen Size | 5.7" |
Area / Volume Calculation | 80 m dia |
Easy Handling | Yes |
Resolution | 0.001mm |
See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient.
The system includes laser transmitter D22 with manual rotatable head, and with the option of deflecting the laser beam 90°. With a few more accessories the system can also be used to check the parallelism of the two tower flanges. In the measurement system’s display unit it is possible to generate a PDF report containing graphs and measurement data. All information about the measurement object is documented.
Easy-Laser® Flange systems can be used on all sizes of flanges, regardless of diameter. You can measure 1 to 5 circles of measurement points, for example inner, middle and outer circles, in order to see the taper of the flange. Each circle can have 6–180 measurement points. The program guides you graphically step-by-step through the entire measurement, which quickens the measurement process. Three methods are available: Full circle measurement, Sectional measurement and Partial measurement.
Easy-Laser® enables you to measure and check the parallelism of the flanges. This can be done in several ways, as shown to the right with system E910 for example. In addition to the standard equipment, two tripods and an angular prism are required.
When the measurement of the flange is complete, the digits must then be interpreted. Easy-Laser® Flange systems make this extremely easy to do. And you can even do it on site, without having to go to a PC with separate analysis programs. You can evaluate the result with different calculation settings, for example “three point reference”, “best fit” or “all positive”. The result is shown via graphics in true 3D.